Stainless steel trench drain model KAG

 

Light industrial load.
Horizontal outlet.

Class L15 / A15 to 1500kg. Light traffic, no pallet trucks or forklift trucks.

The slats of the grilles are welded both from above and below so that tilting of the slats is excluded.

 

Stainless steel drain light duty industrial model KAG
CAD drawing  
Gratings light duty industrialOTHER TYPES OF GRATES
Mesh grids are used as standard. But if desired, each of the grating types that are detailed in the chapter "Stainless steel grates" can be used.

 

 
Possibilities and options   


QUALITY: AISI 316, STAINLESS STEEL PRODUCTION
The drainage channels are standard made of stainless steel materials of 18/8 Cr / Ni (AISI 304) quality. But if desired, they can be made entirely from stainless steel quality AISI 316 material.

PRODUCTION IN SPECIAL SIZES
Although there are more than 100 standard sizes in the production program, special sizes can be produced if desired.

LENGTH EXTENDED
The length of the standard outlets is stated in "CAD drawing". If required, the length of the outlet can be extended to the desired size.

EXTRA CONNECTIONS
To create the possibility that the fountain or some appliances that do not produce a lot of waste water can be directly connected to the drain in the vicinity, additional side connections can be made.

PRODUCTION WITHOUT SIPHON
All drainage channels are produced with siphon as standard. But in situations where one does not want to use the cup siphon due to the circumstances of the subsoil or for any other reason, drainage channels can be produced without siphon.

OUTLET ON ANOTHER SIDE
The standard outlet sides are listed in "CAD drawing". However, if desired, the outlet can be fitted on a side other than that indicated on the technical drawings.

FILLING MATERIAL FOR SURFACE REINFORCEMENT
To make it even easier to assemble and reinforce the load-bearing capacity of the upper profile, a PVC or stainless steel filler profile can be used.

 

Products