Stainless steel drain model TAG

 

Heavy industrial duty.
Vertical outlet.
Factory halls, workshops, production areas, meat processing, fish processing, bakeries, breweries

Class B125. Heavy duty up to 12500kg.
Class C250. Heavy duty up to 25000 kg.
Class D400. Heavy duty up to 40000kg.
Class E600. Heavy duty up to 60000kg.

The slats of the grilles are welded both from above and below so that tilting of the slats is excluded.

 

Stainless steel drainage gutter heavily loaded TAG
CAD drawing  300mm, 400mm
Grates heavy loadOTHER TYPES OF GRATES
Mesh grids are used as standard. However, each of the grate types that are detailed in the chapter "Stainless steel grates" can be used.

 

 
Possibilities and options  

 

QUALITY: AISI 316, STAINLESS STEEL PRODUCTION
The drainage channels are standard made of stainless steel materials of 18/8 Cr / Ni (AISI 304) quality. But if desired, they can be made entirely from stainless steel quality AISI 316 material.

PRODUCTION IN SPECIAL SIZES
Although there are more than 100 standard sizes in the production program, special sizes can be produced if desired.

LENGTH EXPIRED
The length of the standard spouts is stated in "CAD drawing". If required, the length of the outlet can be extended to the desired size.

EXTRA CONNECTIONS
To create the possibility that the fountain or some appliances that do not produce a lot of waste water can be directly connected to the drain in the vicinity, additional side connections can be made.

PRODUCTION WITHOUT SIPHON
All drainage channels are produced with siphon as standard. But in situations where one does not want to use the cup siphon due to the circumstances of the subsoil or for any other reason, drainage channels can be produced without siphon.

OUTLET ON ANOTHER SIDE
The standard outlet sides are listed in "CAD drawing". However, if desired, the outlet can be fitted on a side other than that indicated on the technical drawings.

FILLING MATERIAL FOR SURFACE REINFORCEMENT
To make it even easier to assemble and reinforce the load-bearing capacity of the upper profile, a PVC or stainless steel filler profile can be used.

 

Products