Stainless steel slot drains round profile

 

 

Stainless steel slotdrain YTP-YG  YTP Stainless steel slotdrain  YTP OG k
AREAS OF APPLICATION OF STAINLESS STEEL SLOT DRAINS
-Cooling cells -Pools -Cozy changing and shower rooms -Laboratories -Production of food and beverages
YTP YGMODEL: YTP-YG
Outlet on one side descending at outlet.
Drain with stench trap.
YTP KGMODEL: YTP-KG
Outlet from an angle descending at the exit.
Drain with stench trap.
 
YTP OGMODEL: YTP-OG
Central drain down to the outlet.
Drain with stench trap.
 
YTP 1YMODEL: YTP-1Y
Outlet on one side descending at outlet.
Outlet without stench trap and drain.
YTP 3GMODEL: YTP-3G
T-shaped drains central outlet-descending to the outlet.
Drain with stench trap.
YTP MULTIMODEL:YTP -MULTI
Two or more drainage wells with stench trap each descending from the point to the drain.

 

floor drains horizontal outlet
 
floor drains vertical outlet

 

STANDARD FEATURES
- For stainless steel drains, a constant gradient of 0.6% towards the outlet is used as standard with a length of up to 12000 mm.
- With a gutter with a minimum depth of 62 mm and a maximum depth of 200 mm, it is possible to build a continuous continuous waste water drainage system with a maximum length of 23000 mm, with a constant gradient of 0.6% towards the drain.
- The slot drains can be made to the desired dimensions, provided that they comply with slope, minimum and maximum depth.
- By reducing the slope of the gutter it is possible to construct a drain up to a maximum length of 70.00 meters.
- By using several drainage pits it is possible to construct a trench channel of several meters.
- A reinforcement is provided at the top surface of the trench channel with a mutual distance of 500 mm.
- The slot drains is provided on both sides with an anchorage with a mutual distance of 500 mm. This allows the trench channel to be attached to a concrete surface.
- The slot drains with a plate thickness of 2.00 mm is provided with a flange of 5.00 mm. It is provided with a gasket and is fastened with bolt and nut. The bolt and nut are made of 18/8 Cr / NI (AISI 304 quality).

OPTIONS
- On request, this drainage system of stainless steel AISI 316 quality can be manufactured.
- To simplify installation and to enhance the loadability of the upper profile, a PVC or stainless steel filler profile can be used.

Products