Stainless steel slot drain standard profile

 

TMP YG k
TMP OG k
TMP KG k

AREAS OF APPLICATION OF SLOT DRAINS
Facilities for production and
Processing of:

- Meat and meat products
- Dairy products
- Fish and seafood
- Poultry and eggs
- Frozen products
- Water, fruit juices and
  alcoholic beverages
- Bread and flour products
- Preserves
- Chocolate and candy
- Medicines
- Foods
- Chemical products

 

TMP profiel 2 k
Profile stainless steel slot drains
TMP serie
TMP YGMODEL: TMP-YG
Outlet on one side descending at outlet
Floor drain with stench trap.
YTP KGMODEL: TMP-KG
Outlet from an angle descending at the outlet.
Floor drain with stench trap
 
YTP OGMODEL: TMP-OG
Central drain down to the outlet.
Floor drain with stench trap
 
YTP 1YMODEL: TMP-1Y
Outlet on one side descending at outlet.
Outlet without stench trap and drain.
YTP 3GMODEL: TMP-3G
T-shaped drains central drain-descending to the drain.
Floor drain with stench trap
YTP MULTIMODEL:TMP -MULTI
Two or more drainage wells with stench trap each descending from the point to the drain.

 

put hor
Floor drain horizontal
outlet with grid
put hor rooster
Floor drain horizontal outlet

put vert
Floor drain vertical
outlet with grid
put vert rooster
Floor drain vertical outlet

 

STANDARD FEATURES
- For stainless steel slot drains, a constant gradient of 0.6% towards the outlet is used as standard with a length of up to 12000 mm.
- With a gutter with a minimum depth of 62 mm and a maximum depth of 200 mm, it is possible to build a continuous continuous waste water drainage system with a maximum length of 23000 mm, with a constant gradient of 0.6% towards the drain.
- The stainless steel slot drains can be made to the desired dimensions, provided that they comply with slope, minimum and maximum depth.
- By reducing the slope of the gutter it is possible to construct a stainless steel slot drains up to a maximum length of 70.00 meters.
- By using several drainage pits it is possible to construct a stainless steel slot drains of several meters.
- A reinforcement is provided at the top surface of the stainless steel slot drains with a mutual distance of 500 mm.
- The stainless steel slot drains is provided on both sides with an anchorage with a mutual distance of 500 mm. This allows the trench channel to be attached to a concrete surface.
- The stainless steel slot drains with a plate thickness of 2.00 mm is provided with a flange of 5.00 mm. It is provided with a gasket and is fastened with bolt and nut. The bolt and nut are made of 18/8 Cr / NI (AISI 304 quality).

OPTIONS
- On request, this drainage system of stainless steel AISI 316 quality can be manufactured.
- To simplify installation and to enhance the loadability of the upper profile, a PVC or stainless steel filler profile can be used.

Products