Stainless steel slot, standard profile with rim filling

 

 

Stainless steel slotdrain model: SPK-YG
Stainless steel slotdrain model: SPK-OG
Stainless steel slotdrain model: SPK-3G


AREAS OF APPLICATION OF
INDUSTRIAL SLOT DRAINS
Facilities for production and
Processing of:

- Meat and meat products
- Dairy products
- Fish and seafood
- Poultry and eggs
- Frozen products
- Water, fruit juices and
   alcoholic beverages

- Bread and flour products
- Preserves
- Chocolate and candy
- Medicines
- Foods
- Chemical products

 

SPK
SPK YGMODEL: SPK-YG
Outlet on one side descending at the outlet. Drain with stench trap.
YTP KGMODEL: SPK-KG
Spout from an angle descending at the exit. Drain with stench trap.
 
YTP OGMODEL: SPK-OG
Central drain down to the outlet.
Drain with stench trap.
 
YTP 1YMODEL: SPK-1Y
Outlet on one side descending at outlet.
Outlet without stench trap and drain.
YTP 3GMODEL: SPK-3G
T-shaped drains central drain-descending to the drain. Drain with stench trap.
YTP MULTIMODEL:SPK-MULTI
Two or more drainage wells with stench trap each descending from the point to the drain.

 

put hor
Floor drain horizontal outlet with grid
put hor rooster
Floor drain horizontal outlet

put vert
Floor drain vertical outlet with grid
put vert rooster
Floor drain verical outlet

 

STANDARD FEATURES
- For stainless steel trenches and louvres, a constant gradient of 0.6% towards the outlet is used as standard with a length of up to 12000 mm.
- With a gutter with a minimum depth of 62 mm and a maximum depth of 200 mm, it is possible to build a continuous continuous waste water drainage system with a maximum length of 23000 mm, with a constant gradient of 0.6% towards the drain.
- The trench channels can be made to the desired dimensions, provided that they comply with slope, minimum and maximum depth.
- By reducing the slope of the gutter it is possible to construct a trench channel up to a maximum length of 70.00 meters.
- By using several drainage pits it is possible to construct a trench channel of several meters.
- A reinforcement is provided at the top surface of the trench channel with a mutual distance of 500 mm.
- The trench channel is provided on both sides with an anchorage with a mutual distance of 500 mm. This allows the trench channel to be attached to a concrete surface.
- The trench channel with a plate thickness of 2.00 mm is provided with a flange of 5.00 mm. It is provided with a gasket and is fastened with bolt and nut. The bolt and nut are made of 18/8 Cr / NI (AISI 304 quality).

OPTIONS
- On request, this drainage system of stainless steel AISI 316 quality can be manufactured.
- To simplify installation and to enhance the loadability of the upper profile, a PVC or stainless steel filler profile can be used.

Products