Stainless steel isolated floor drain model: DAG
Light industrial load.
Vertical isolated outlet.
Class L15 / A15 to 1500kg. Light traffic, no pallet trucks or forklift trucks. The slats of the grilles are welded both from above and below so that tilting of the slats is excluded.
Possibilities and options
AISI 316, stainless steel PRODUCTION
The stainless steel drains are standard made of stainless steel materials of 18/8 Cr / Ni (AISI 304) quality. But if desired, they can be made entirely from stainless steel quality AISI 316 material.
The length of the standard drains is mentioned in the chapter "CAD Drawing". If required, the length of the drain can be extended to the desired size.
FILLING MATERIAL FOR SURFACE REINFORCEMENT
In order to be able to carry out the installation of the drain well more easily and to increase the load-bearing capacity of the upper profile, a PVC or stainless steel filler profile can be used.
To create the possibility that the fountain or some appliances that do not produce a lot of waste water can be connected directly to the drain in the vicinity, additional side connections can be made.
PRODUCTION WITHOUT SIPHON
All drainage pits are produced with siphon as standard. But in situations where one does not want to use the cup siphon due to the circumstances of the subsurface or for any other reason, drainage channels can be produced without siphon.
PRODUCTION IN SPECIAL SIZES
Although there are more than 100 standard sizes in the production program, special sizes can be produced if desired.
OTHER TYPES OF TOP GRATINGS
Reinforced mesh gratings are used as standard. But if desired, each of the grating types that are detailed in the chapter "Stainless steel grates" can be used